Spanish 
- IN-IN + input Positive Input Negative!
- Positive output OUT + OUT-output negative
- Test comparison sample reference:
- Input 3V Output 12V 0.4A 4.8W
- Input 5V Output 12V 0.8A 9.6W
- Input 7.4V Output 12V 1.5A 18W
- Input 12V Output 15V 2A 30W
- Input 12V Output 16V 2A 32W
- Input 12V Output 18V 1.6A 28.8W
- Input 12V Output 19V 1.5A 28.5W
- Input 12V Output 24V 1 A 24W
- Vin * Iin * Efficiency = Vout * Iout
- Vin: Input Voltage
- Iin: input current
- Vout: Output Voltage
- Iout: output current
DSN6009 4A is a high-performance step-up switching current (BOOST) module. The module uses the
second generation of high-frequency switching technology XL6009E1 core chip performance than the
first generation technology LM2577. XL6009 boost module at a lower cost, superior performance,
LM2577 module is about to be eliminated.
Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V;
Wide Output voltage 5V ~ 35V;
Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A)
high switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very
good results, the ripple smaller and smaller. (LM2577 frequency only 50KHz)
Technical parameters:
- Model Specification: DSN6009 boost module
- Module Properties: Non-isolated boost (BOOST)
- Rectification: Non-Synchronous Rectification
- Input Range: 3V ~ 32V
- Output Range: 5V ~ 35V
- Input Current:4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.)
- Conversion efficiency: <94% (greater the pressure, the lower the efficiency)
- Switching frequency: 400KHz
- Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)
- Load Regulation: ± 0.5%
- Voltage Regulation: ± 0.5%
- Operating Temperature: -40 ° ~ +85 °
- Dimensions: 43mm * 21mm * 14mm (L * W * H)
